To configure a Loxone audio system, first create a treeturbo bus.
You can create the audioserver and desired stereo extensions under this. The desired speaker cables or outgoing bus cables can also be connected under the treeturbo bus:
For a
- speaker cable: attach a terminal block with 2 conductors and use the individual cable designation if you are using a special cable type. In the conductors, you can use the assignment for the channels of the audio server.
- Audio treeturbo cable: connect a terminal block with 4 or 6 conductors here and configure the connection to the bus system under ‘Type’ for the conductors. As with the tree cable, you can also add a 24V supply to additional conductors.
The result should look something like this:
Tip:
When using the miniserver compact, start the same way as described above: first connect the treeturbo bus and configure all the desired outlet cables and stereo extensions.
You can create the miniserver compact under the Loxone link bus (as this is its main bus system) and then you can configure a link to the treeturbo bus:
