To display 24V binary inputs, first connect the desired terminal blocks for the outgoing cables under the desired output of the power supply.
By installing the terminal block under the power supply, the (+) conductor and Gnd conductor of the terminal block are connected directly to the (+/Gnd) output of the power supply.
If certain conductors of the terminal block are connected to Loxone devices (e.g. the DI Extension), use the assignment function again in the desired conductors of the terminal block:
You will then be shown a diagram in which the (+) channel of the power supply leads into the building and is then fed back to the DI extension via the other conductors.
As shown in the example under -T1.2, we can see that the DI extension closes the circuit back to Gnd.
